this post will describe my custom gaming rig, which is more complex than most. It is complicated because it also provides shelter, heating and cooling, and it makes the electricity that is required to destroy monsters and demons in comfort.
I am posting this because my favorite you tuber is a master computer builder called optimum tech. I am an avid pc gamer, even though i am 64 years of age. Optimum tech is all about small system size, excellent cooling, low noise, and a comfortable gaming environment.
Having just rebuilt his main personal computer, and found the best gaming peripherals, [including building his own mouse!], he is now eyeing his desk. boy, do i have a way to devote some time to shaping wood!
This desk is sawn from a ponderosa that fell in a friend's yard. The huge, ancient tree fell over, but remained propped up on it's limbs. It was not a bit rotted. My friend is what you might call a paleo senior. he gave me the tree during a wildfire because it was too close to the house that he had built from , you guessed it, blue pine! he gave me the huge tree on the condition that I also help him drag trees down his mountain. we dragged them down the pretty steep mountain like a team of mules, and loaded them onto my trailer on a dirt road below.
I guess that what I am saying is that I did not buy this slab of wood. instead, I cut it from one of those logs that we either dragged, or cut so that it fell into my pickup bed, drove down a small mountain, and then [assisted by the paleo woman of the house], loaded onto my flatbed trailer. I then used an Alaskan mill, slicing the ponderosa sections into neat slabs with a live edge on either side.
i had to trim this particular slab on one side, so that it fits along the wall with a small gap to hide the wires. Deciding against vertical legs, I attached it to the wall more like a large shelf. it is easier to move a rolling chair all around the room without hitting vertical legs. With a thick slab of soft wood, it is possible to optimize the edges for gaming.
About the chair: I have trouble with my back, so after a bit of whining and complaining about various mushy chairs, I behaved more like a busy monkey, and built my own chair.
the angles fit my abused back perfectly, so that I can get to the perfect physical position for gaming and leave my feeble old body. There are tiny hard pads that go on each part, but I removed them so that you can see the wood clearly.
I salvaged all that wood from a deck that was removed to reduce fire danger. The wheels are 4 inches tall, so they do not get stuck in a small depression, and they are soft, so they do not damage the floor too much. The result is a friction free roll, so that you can cross a room almost instantly. Also, a floor that is kind to bare feet, but is not covered by nasty carpet.
This building is my office, and as you might have guessed by now, I did not buy it or rent it.
It was the first shelter that I built when I moved to Washington state in 2015. Sadly, I pitched the roof at 22.5 degrees, so that it's original rooftop solar array was always covered with snow in the winter. The tiny solar energy system that is set up now uses just these 2 medium sized panels on a simple rack that turns with the sun if needed.
They charge a single 200 amp hour 12 v battery that powers a small and quiet inverter. Typically, this back up system powers my dual monitors, but it can run the gaming computer for a limited time if the huge battery in the shop is exhausted during a long storm.
The shop to the right is a more recent building with better design. The 4 LG 375 watt panels are held at 45 degrees, forming an adjustable awning for the south facing glass. overhangs are 2 feet, so that windows and fir siding are protected from the pacific northwest climate.
The deck and stairs of the office are more slabs of blue pine. To the left, you can see a project. It is an attempt at the smallest possible gaming studio.
The floor is just 6 feet square, so this is no trophy home! it does make a good bit of power with small solar panels on the round roof. and, it can be carried by almost any truck or trailer. Framed from cedar, it will last for a long time in any climate. And, I like the look of the rusty corrugated metal.
the inside is used pine t&g, and here is the initial solar energy install that I will use to complete the build no matter where the trailer is located. All components are over 20 years old, except for the battery, which is a nice new redodo 100 ah 12.8 v LiFeO4 model.
This space is clearly calling out for some furniture made from blue pine slabs!
No comments:
Post a Comment
Comments are moderated. No misinformation or personal attacks are allowed. [yes, since it is my blog, i get to decide what is information and what is misinformation].